You can create this directory by typing as root: Make sure you double check that the directory /mnt/camera exists. Using this information, I can now mount the camera like any other hard disk using the following commands as root: The most important part of this message is the device name allocated to the camera, in this case "sda1".
JALBUM SMARTPHONES DRIVER
SCSI device sda: 501760 512-byte hdwr sectors (257 MB)įrom these messages, you can see that the camera has been detected and a USB Mass Storage device driver has been loaded. Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: STORAGE DEVICE Rev: 0128 Scsi0: SCSI emulation for USB Mass Storage devices If the camera or card reader is supported by Linux, you should see some messages similar to the following: After attaching your card reader or camera to your computer, type the following command in a shell. Fortunately, Linux is much smarter and only adds a drive when it's got a memory card in it.
If you're using a product like this under Windows, the reader shows up as seven individual drives! This is both confusing and irritating, as you'll often find yourself double-clicking on random drive letters to find the contents of the memory card you just inserted. You can pick one of these handy devices up for about $30, which is a worthwhile investment if you're often transferring photos from your camera. Memory card readers - like the Laser 7-in-1 memory card reader that I have used in this article - can also be accessed with this method.
JALBUM SMARTPHONES DRIVERS
This means that the camera is seen as a portable hard disk by the computer and no special drivers are needed, much like a USB key. Most other cameras can be accessed as a USB Mass Storage device. When you're done using gPhoto, remember to turn your camera off before disconnecting it from your computer. You can now copy these images to your computer. If supported, the camera will be auto-detected by gtkam and thumbnails of the images stored on it will be displayed. Once the camera is on, start gtkam by typing at a prompt: To access your camera, connect your digital camera to the USB port on your computer and switch the camera on. GPhoto includes a simple GUI interface, named gtkam. If your camera isn't listed in gPhoto, the chances are that it can be accessed using the USB Mass Storage method covered in the next section. A complete list is available at, and you'll find a copy of gPhoto on this month's cover disc. GPhoto > is a "one size fits all" solution to accessing photos stored on your digital camera, and includes native driver support for hundreds of cameras.
JALBUM SMARTPHONES TRIAL
The best way to work out which method suits your hardware is simply to indulge in a little trial and error. Some cameras work with the first method, others with the second. Determining which method is best for your camera will depend on the model of camera that you have. There are two ways to access and download images from a digital camera under Linux.
0 kommentar(er)
